13-05-2024 - 17-05-2024	3800	Abu Dhabi

Course Introduction:

This course is concerned with the potential health, safety & environmental hazards arising from the operation of large scale oil and gas production and processing facilities. The focus is on major hazards such as fire, explosion and toxic gas releases, but some of the techniques featured are applicable to the whole range of workplace risks and environmental impacts. The essential first step is hazard identification, which may be carried out by means of checklists, inventorization of equipment and hazardous materials, and by structured techniques such as HAZOP. Once identified, the potential consequences may be determined by a screening-level consequence analysis, and if the consequences are significant, a risk assessment may be required, in which the probability factor is taken into account. This may be done by simple qualitative methods such as the Risk Matrix, or if necessary by more thorough quantitative approach, in which the consequences are fully evaluated using computer models and the possible event scenarios are examined using Fault Trees and Event Trees, supported by statistical data from experience of incidents, equipment failures and human errors.

In this course, all of these techniques will be presented, and guidance will be provided on their proper applications and range of usefulness. The attendees will carry out exercises in hazard identification, consequence analysis and risk assessment and will apply simple mathematics to calculate probabilities, frequencies etc. They will learn the essential “do’s and don’ts” of risk assessment and should finish the course equipped either to carry out their own assessments or to direct staff or contractors doing such work.

Course Objectives:

Upon successful completion of this course, the delegates will be able to:

Identify the importance of risk, risk assessment and hazard
Differentiate between the basics of consequence analysis and screening-level consequence analysis
Discuss types of risk that includes people, assets, environment, reputation and etc.
Explain quantitative risk assessment and quantitative risk analysis
Determine the use of risk assessment

Who Should Attend?

This course is intended for all supervisors and line management who need to fulfill their role within HSE, production, process, mechanical, control, maintenance, and HSE personnel. Also suitable to all personnel involved in implementing the company’s HSE management system.

Course Outline:

Day 1:

Introduction

The importance of risk assessment in projects and operations
Typical hazards in oil & gas facilities - examples
Risk management through the facility life-cycle
Business gains from safety in operation
Policies on HSE risk management, use of HEMP process, etc.

Hazard Identification

Simple methods - Inventories, Checklists
Hazard and Operability Study (HAZOP) - Basis of the technique - The role of the team members and the team leader - Planning & preparation - Documentation, data requirements and reports
Other techniques - PHA, Dow or Mond Index, “What If”? Etc.
The attendees will play roles in a HAZOP team

Day 2:

Basics of Consequence Analysis

Typical hydrocarbon process fluids and their properties
Hole sizes and leak rates
Flash vaporisation, formation of liquid pools, evaporation
Ignition
Jet fires and pool fires
Explosions - confined spaces, in congested plant, in unconfined areas
Asphyxiates and toxic gases
Vulnerability of personnel, buildings and equipment

Screening-Level Consequence Analysis

Use of simplifying assumptions

Day 3:

Introduction to Risk Assessment

Types of risk - people, assets, environment, reputation, and more.....
Measures of risk - probability and severity, the PDO Risk Matrix
Defining the “initiating events” - usually, a set of leaks
Qualitative assessment of Frequency and Severity

Quantitative Risk Assessment

Frequency analysis - equipment failure rate data, Fault Trees
Accident scenarios - Event Trees, wind/weather effects, emergency response, failures of protective systems, use of consequence analyses

Day 4:

Quantitative Risk Analysis – concluded

Human factors, human reliability and errors
Risk calculations - Individual Risk (IRPA), Societal Risk (PLL), risk contours, F-N curve
Use of risk assessment to support plant sitting, layout and spacing decisions
Use of risk results in decision-making about preventive and protective safeguards - cost benefit analysis

Quantitative Risk Assessment Exercise

The exercise will provide an example of risk assessment used to decide on the best options for safety upgrades to an existing facility. Attendees will make approximate assessment of the risks; develop a list of possible upgrades and use risk criteria and a cost-benefit approach to decide on the best options.

Day 5:

The use of risk assessment to support plant sitting, layout and spacing decisions